Atlas Copco’s GA compressors bring outstanding performance, flexible operation and high productivity, while minimizing the total cost of ownership. With this premium compressor series you will certainly find the compressed air solution that perfectly matches your specific requirements. Through products that are built to perform in even the harshest environments, Atlas Copco commits to keeping your production running in the most efficient way.
Most production processes create fluctuating levels of demand. This creates energy waste in low air demand periods. Using the Elektronikon® unit controller, you can manually or automatically switch between two different setpoints to optimize energy and reduce cost.
In addition, the sophisticated algorithm runs the drive motor only when needed. As the desired setpoint is maintained while the drive motor’s run time is minimized, energy consumption is kept to a minimum.
Over 80% of a compressor’s lifecycle cost is taken up by the energy it consumes. The generation of compressed air can account for more than 40% of a plant’s total electricity bill. To cut your energy costs we’ve pioneered in Variable Speed Drive (VSD) Technology in the compressed air industry.
Atlas Copco’s VSD technology closely follows the air demand by automatically adjusting the motor speed. This results in energy savings of up to 35%.
Our oil injected compressors use an integrated energy recovery system. It recovers up to 78% of the energy from the motor and the element oil circuit. Through efficient usage of the recovered energy, you generate important energy cost savings and a high return on investment.
It’s important to know the status of your compressed air system. You want to achieve optimal efficiency and maximum availability. With SMARTLINK you can monitor your compressed air installation. Monitoring your system not only saves you money, but also avoids breakdowns and production losses.
Our GA oil-injected screw compressors bring industry-leading performance, flexible operation and high productivity, reduced energy costs at a minimal cost of ownership. A wide range of compressors enables you to find the air solution that perfectly matches your specific requirements. Built to perform in even the harshest environments, an Atlas Copco GA keeps your production running efficiently.
Atlas Copco’s VSD⁺ technology closely follows the air demand by automatically adjusting the motor speed to match the compressed air supply to the demand. Combined with the innovative patented iPM (interior Permanent Magnet) motor (IE4), the GA VSD⁺ achieves average energy savings of 50%. This reduces the total lifecycle costs of the compressor up to 37% on average. On top of energy savings up to 50% , the GA VSD⁺ realizes a Free Air Delivery (FAD) increase of up to 12% for improved efficiency and performance.
Able to tackle extreme duties as daily challenges, Atlas Copco’s high-performance tank mounted GA compressors beat any workshop solution. Ready to supply high-quality air, they keep the air network clean and your production up and running.
A true game changer for your operational environment, with reduced energy consumption by on average 50% and assures performance even in the harshest conditions. The unit comes with Variable Speed Drive as standard, Atlas Copco’s own designed iPM motor technology, and advanced connectivity.
Not only is it a ground-breaking new compressor range, it is an operational transformation. It reduces energy costs by 50% on average and maximizes uptime, even in the harshest conditions. Driving this next-level performance: Atlas Copco’s Variable Speed Drive, a powerful interior permanent magnet motor, and our in-house developed Neos inverter.
The GA 110-160 VSD compressors provide high-quality compressed air in the harshest environmental conditions. Incorporating the patented Atlas Copco’s oil-injected screw element, they provide a long and trouble-free life at the lowest possible operating cost.
The Atlas Copco GA 160+-315 (VSD) compressors are designed to help you achieve significant savings. The compressors provide high-quality compressed air to meet your requirements even in the most demanding applications.
The GA 355-500 compressors provide high-quality compressed air in the harshest environmental conditions. Incorporating Atlas Copco’s oil-injected screw element, they provide a long and trouble-free life at the lowest possible operating cost.
COMPRESSOR TYPE | Working pressure: bar(e) | psig | Capacity FAD* min-max: l/s | m3/h | cfm | Installed motor power: kW | hp | Noise level dB(A) | Weight (kg): Floor-mounted | Tank-mounted | Full Feature: Floor-mounted | Tank-mounted |
---|---|---|---|---|---|---|---|---|---|---|---|---|
GA 5 | 7.5 | 109 | 15 | 54 | 31.7 | 5.5 | 7.5 | 60 | 257 | 317 | 300 | 360 |
8.5 | 123 | 13.2 | 47.5 | 27.9 | 5.5 | 7.5 | 60 | 257 | 317 | 300 | 360 | |
10 | 145 | 11.7 | 42.1 | 24.7 | 5.5 | 7.5 | 60 | 257 | 317 | 300 | 360 | |
13 | 189 | 8.4 | 30.2 | 17.7 | 5.5 | 7.5 | 60 | 257 | 317 | 300 | 360 | |
GA 7 | 7.5 | 109 | 21 | 78.5 | 46 | 7.5 | 10 | 61 | 270 | 330 | 315 | 375 |
8.5 | 123 | 19.6 | 70.6 | 41.5 | 7.5 | 10 | 61 | 270 | 330 | 315 | 375 | |
10 | 145 | 17.2 | 61.9 | 36.3 | 7.5 | 10 | 61 | 270 | 330 | 315 | 375 | |
13 | 189 | 14.2 | 51.1 | 30 | 7.5 | 10 | 61 | 270 | 330 | 315 | 375 | |
GA 11 | 7.5 | 109 | 30.7 | 110.5 | 64.8 | 11 | 15 | 62 | 293 | 353 | 343 | 403 |
8.5 | 123 | 28.3 | 101.9 | 59.7 | 11 | 15 | 62 | 293 | 353 | 343 | 403 | |
10 | 145 | 26 | 93.6 | 54.9 | 11 | 15 | 62 | 293 | 353 | 343 | 403 | |
13 | 189 | 22 | 79.2 | 46.5 | 11 | 15 | 62 | 293 | 353 | 343 | 403 |
Compressor type | Max. working pressure: bar(e) | psig | Capacity FAD* (min-max): l/s | m³/h | cfm | Installed motor power: kW | hp | Noise level: dB(A) | Weight WorkPlace: kg | Weight WorkPlace Full Feature: kg |
---|---|---|---|---|---|---|---|---|---|---|
GA 7 VSD+ | 5.5 | 80 | 7.2-21.9 | 25.9-78.8 | 15.2-46.4 | 7.5 | 10 | 62 | 193 | 277 |
7 | 102 | 7.0-21.7 | 25.2-78.1 | 14.8-46.0 | 7.5 | 10 | 62 | 193 | 277 | |
9.5 | 138 | 6.8-18.0 | 24.5-64.8 | 14.4-38.1 | 7.5 | 10 | 62 | 193 | 277 | |
12.5 | 181 | 7.3-14.2 | 26.3-51.1 | 15.5-30.1 | 7.5 | 10 | 62 | 193 | 277 | |
GA 11 VSD+ | 5.5 | 80 | 7.3-32.9 | 26.3-118.4 | 15.5-69.7 | 11 | 15 | 63 | 196 | 280 |
7 | 102 | 7.3-32.5 | 26.3-117.0 | 15.5-68.8 | 11 | 15 | 63 | 196 | 280 | |
9.5 | 138 | 7.0-27.2 | 25.2-97.9 | 14.8-57.6 | 11 | 15 | 63 | 196 | 280 | |
12.5 | 181 | 7.6-23.5 | 27.4-84.6 | 16.1-49.8 | 11 | 15 | 63 | 196 | 280 | |
GA 15 VSD+ | 5.5 | 80 | 7.2-42.3 | 25.9-152.3 | 15.2-89.6 | 15 | 20 | 64 | 199 | 288 |
7 | 102 | 7.1-41.8 | 25.6-150.5 | 15.0-88.6 | 15 | 20 | 64 | 199 | 288 | |
9.5 | 138 | 6.8-35.5 | 24.5-127.8 | 14.4-75.2 | 15 | 20 | 64 | 199 | 288 | |
12.5 | 181 | 7.3-27.9 | 26.3-100.4 | 15.5-59.1 | 15 | 20 | 64 | 199 | 288 | |
GA 18 VSD+ | 4 | 58 | 15.1-63.9 | 54.4-230.0 | 32.0-135.4 | 18 | 25 | 67 | 367 | 480 |
7 | 102 | 14.9-62.5 | 53.6-225.0 | 31.6-132.4 | 18 | 25 | 67 | 367 | 480 | |
9.5 | 138 | 17.1-53.6 | 61.6-193.0 | 36.2-113.6 | 18 | 25 | 67 | 367 | 480 | |
12.5 | 181 | 16.4-43.5 | 59.0-156.6 | 34.7-92.2 | 18 | 25 | 67 | 367 | 480 | |
GA 22 VSD+ | 4 | 58 | 15.3-76.9 | 55.1-276.8 | 32.4-162.9 | 22 | 30 | 67 | 363 | 485 |
7 | 102 | 15.0-75.1 | 54.0-270.4 | 31.8-159.1 | 22 | 30 | 67 | 363 | 485 | |
9.5 | 138 | 17.3-65.2 | 62.3-234.7 | 36.7-138.2 | 22 | 30 | 67 | 363 | 485 | |
12.5 | 181 | 17.1-54.1 | 61.6-194.8 | 36.2-114.6 | 22 | 30 | 67 | 363 | 485 | |
GA 26 VSD+ | 4 | 58 | 14.9-86.3 | 53.6-310.7 | 31.6-182.9 | 26 | 35 | 67 | 373 | 490 |
7 | 102 | 14.5-85.5 | 52.2-307.8 | 30.7-181.2 | 26 | 35 | 67 | 373 | 490 | |
9.5 | 138 | 17.0-78.4 | 61.2-282.2 | 36.0-166.1 | 26 | 35 | 67 | 373 | 490 | |
12.5 | 181 | 16.4-64.5 | 59.0-232.2 | 34.7-136.7 | 26 | 35 | 67 | 373 | 490 | |
GA 30 VSD+ | 4 | 58 | 15.1-98.0 | 54.4-352.8 | 32.0-207.7 | 30 | 40 | 67 | 376 | 500 |
7 | 102 | 15.0-97.4 | 54.0-350.6 | 31.8-206.4 | 30 | 40 | 67 | 376 | 500 | |
9.5 | 138 | 17.1-85.6 | 61.6-308.2 | 36.2-181.4 | 30 | 40 | 67 | 376 | 500 | |
12.5 | 181 | 16.7-72.0 | 60.1-259.2 | 35.4-152.6 | 30 | 40 | 67 | 376 | 500 | |
GA 37 VSD+ | 4 | 58 | 15.3-116.5 | 55.1-419.4 | 32.4-246.8 | 37 | 50 | 67 | 376 | 500 |
7 | 102 | 14.8-115.0 | 53.3-414.0 | 31.4-243.7 | 37 | 50 | 67 | 376 | 500 | |
9.5 | 138 | 17.1-102.3 | 61.6-368.3 | 36. 2-216.8 | 37 | 50 | 67 | 376 | 500 | |
12.5 | 181 | 16.4-86.7 | 59.0-312.1 | 34.7-183.7 | 37 | 50 | 67 | 376 | 500 | |
GA 37L VSD+ *** | 4 | 58 | 26.2-132.9 | 94.2-478.6 | 55.5-81.7 | 37 | 50 | 67 | 860 | 1060 |
7 | 102 | 25.8-131.9 | 92.9-474.7 | 54.7-279.4 | 37 | 50 | 67 | 860 | 1060 | |
9.5 | 138 | 24.8-116.0 | 89.2-417.7 | 52.5-245.8 | 37 | 50 | 67 | 860 | 1060 | |
12.5 | 181 | 38.2-98.7 | 137.5-355.2 | 80.9-209.1 | 37 | 50 | 67 | 860 | 1060 |
Compressor type | Max. working pressure: bar(e) | psig | Capacity FAD* (min-max): l/s | m³/h | cfm | Installed motor power: kW | hp | Noise level: dB(A) | Weight: kg | Weight Full Feature: kg |
---|---|---|---|---|---|---|---|---|---|---|
GA 37L VSD+ | 4 | 58 | 26-133 | 94-479 | 55-282 | 37 | 50 | 67 | 860 | 1060 |
7 | 102 | 26-132 | 93-475 | 55-279 | 37 | 50 | 67 | 860 | 1060 | |
9.5 | 138 | 25-116 | 89-418 | 53-246 | 37 | 50 | 67 | 860 | 1060 | |
12.5 | 181 | 38-99 | 138-355 | 81-209 | 37 | 50 | 67 | 860 | 1060 | |
GA 45 VSD+ | 4 | 58 | 26-159 | 94-573 | 55-337 | 45 | 60 | 67 | 860 | 1060 |
7 | 102 | 26-157 | 93-565 | 55-332 | 45 | 60 | 67 | 860 | 1060 | |
9.5 | 138 | 25-137 | 89-494 | 53-291 | 45 | 60 | 67 | 860 | 1060 | |
12.5 | 181 | 38-115 | 138-359 | 81-211 | 45 | 60 | 67 | 860 | 1060 | |
GA 55 VSD+ | 4 | 58 | 26-189 | 93-680 | 55-400 | 55 | 75 | 67 | 900 | 1100 |
7 | 102 | 26-188 | 94-677 | 55-399 | 55 | 75 | 67 | 900 | 1100 | |
9.5 | 138 | 26-166 | 93-598 | 55-352 | 55 | 75 | 67 | 900 | 1100 | |
12.5 | 181 | 40-140 | 145-504 | 85-297 | 55 | 75 | 67 | 900 | 1100 | |
GA 75 VSD+ | 4 | 58 | 26-226 | 93-815 | 55-480 | 75 | 100 | 70 | 920 | 1120 |
7 | 102 | 27-225 | 97-809 | 57-476 | 75 | 100 | 70 | 920 | 1120 | |
9.5 | 138 | 27-198 | 96-712 | 57-419 | 75 | 100 | 70 | 920 | 1120 | |
12.5 | 181 | 42-167 | 150-600 | 88-353 | 75 | 100 | 70 | 920 | 1120 | |
GA 75L VSD+ | 4 | 58 | 47-269 | 169-967 | 100-569 | 75 | 100 | 73 | 1207 | 1496 |
7 | 102 | 48-266 | 172-957 | 101-563 | 75 | 100 | 73 | 1207 | 1496 | |
9.5 | 138 | 58-235 | 210-847 | 124-498 | 75 | 100 | 73 | 1207 | 1496 | |
12.5 | 181 | 70-194 | 252-699 | 149-411 | 75 | 100 | 73 | 1207 | 1496 | |
GA 90 VSD+ | 4 | 58 | 48-311 | 174-1121 | 102-660 | 90 | 125 | 74 | 1213 | 1503 |
7 | 102 | 49-306 | 176-1101 | 104-648 | 90 | 125 | 74 | 1213 | 1503 | |
9.5 | 138 | 60-269 | 215-969 | 127-570 | 90 | 125 | 74 | 1213 | 1503 | |
12.5 | 181 | 71-218 | 255-784 | 150-461 | 90 | 125 | 74 | 1213 | 1503 | |
GA 110 VSD+ | 4 | 58 | 47-348 | 170-1251 | 100-736 | 110 | 150 | 76 | 1222 | 1573 |
7 | 102 | 49-345 | 175-1241 | 103-731 | 110 | 150 | 76 | 1222 | 1573 | |
9.5 | 138 | 59-309 | 211-1111 | 124-654 | 110 | 150 | 76 | 1222 | 1573 | |
12.5 | 181 | 71-268 | 254-965 | 150-568 | 110 | 150 | 76 | 1222 | 1573 |
Type 50 Hz | Compressor Load | Standard Working Pressure: bar(e) | psig | Full Feature Working Pressure: bar(e) | psig | Standard / Full Feature Capacity FAD: l/s | m3/min | cfm | Installed motor power: kW | Noise level: dB(A) | Standard Weight: kg | lbs | Full Feature Weight: kg | lbs |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GA 110 VSD - 8.5 bar | Minimum | 5 | 72 | 5 | 72 | 128 - 437 | 7.7 - 26.2 | 271 - 926 | 110 | 78 | 3375 | 7441 | 4015 | 8851 |
Nominal | 7 | 101 | 7 | 101 | 128 - 392 | 7.7 - 23.5 | 271 - 831 | |||||||
Maximum | 8.5 | 123 | 8.3 | 120 | 154 - 359 | 9.2 - 21.5 | 326 - 761 | |||||||
GA 110 VSD - 10 bar | Minimum | 6 | 87 | 6 | 87 | 182 - 411 | 10.9 - 24.7 | 386 - 871 | 110 | 78 | 3375 | 7441 | 3975 | 8763 |
Nominal | 9.5 | 138 | 9.5 | 138 | 177 - 334 | 10.6 - 20.0 | 375. 708 | |||||||
Maximum | 10 | 145 | 9.8 | 142 | 176 - 325 | 10.6 - 19.5 | 373 - 689 | |||||||
GA 110 VSD - 14 bar | Minimum | 9 | 131 | 9 | 131 | 178 - 344 | 10.7 - 20.6 | 377 - 729 | 110 | 78 | 3375 | 7441 | 3950 | 8708 |
Nominal | 13.5 | 196 | 12.5 | 181 | 166 - 266 | 10.0 - 16.0 | 352 - 564 | |||||||
Maximum | 14 | 203 | 12.8 | 185 | 165 - 258 | 9.9 - 15.5 | 350 - 547 | |||||||
GA 132 VSD - 8.5 bar | Minimum | 5 | 72 | 5 | 72 | 128 - 513 | 7.7 - 30.8 | 271 - 1087 | 132 | 78 | 3415 | 7529 | 4050 | 8929 |
Nominal | 7 | 101 | 7 | 101 | 128 - 463 | 7.7 - 27.8 | 271 - 981 | |||||||
Maximum | 8.5 | 123 | 8.3 | 120 | 154 - 426 | 9.2 - 25.6 | 326 - 903 | |||||||
GA 132 VSD - 10 bar | Minimum | 6 | 87 | 6 | 87 | 182 - 484 | 10.9 - 29.0 | 386 - 1026 | 132 | 78 | 3415 | 7529 | 4050 | 8929 |
Nominal | 9.5 | 138 | 9.5 | 138 | 177 - 399 | 10.6 - 23.9 | 375 - 845 | |||||||
Maximum | 10 | 145 | 9.8 | 142 | 176 - 389 | 10.6 - 23.3 | 373 - 824 | |||||||
GA 132 VSD - 14 bar | Minimum | 9 | 131 | 9 | 131 | 178 - 409 | 10.7 - 24.5 | 377 - 867 | 132 | 78 | 3415 | 7529 | 4050 | 8929 |
Nominal | 13.5 | 196 | 12.5 | 181 | 166 - 324 | 10.0 - 19.4 | 352 - 687 | |||||||
Maximum | 14 | 203 | 12.8 | 185 | 165 - 316 | 9.9 - 19.0 | 350 - 670 | |||||||
GA 160 VSD - 8.5 bar | Minimum | 5 | 72 | 5 | 72 | 128 - 569 | 7.7 - 34.1 | 271 - 1206 | 160 | 78 | 3515 | 7749 | 4155 | 9160 |
Nominal | 7 | 101 | 7 | 101 | 128 - 548 | 7.7 - 32.9 | 271 - 1161 | |||||||
Maximum | 8.5 | 123 | 8.3 | 120 | 154 - 507 | 9.2 - 30.4 | 326 - 1074 | |||||||
GA 160 VSD - 10 bar | Minimum | 6 | 87 | 6 | 87 | 182 - 565 | 10.9 - 33.9 | 385 - 1197 | 160 | 78 | 3515 | 7749 | 4155 | 9160 |
Nominal | 9.5 | 138 | 9.5 | 138 | 177 - 477 | 10.6 - 28.6 | 375 - 1011 | |||||||
Maximum | 10 | 145 | 9.8 | 142 | 176 - 466 | 10.6 - 28.0 | 373 - 987 | |||||||
GA 160 VSD - 14 bar | Minimum | 9 | 131 | 9 | 131 | 178 - 489 | 10.7 - 29.3 | 377 - 1036 | 160 | 78 | 3515 | 7749 | 4155 | 9160 |
Nominal | 13.5 | 196 | 12.5 | 181 | 166 - 395 | 10.0 - 23.7 | 352 - 837 | |||||||
Maximum | 14 | 203 | 12.8 | 185 | 165 - 385 | 9.9 - 23.1 | 350 - 816 |
TYPE | Standard Working Pressure: bar(e) | psig | Full Feature Working Pressure: bar(e) | psig | Standard / Full Feature Capacity FAD: l/s | m³/min | cfm | Installed motor power: kW | Noise level: dB(A) | Standard Weight: kg | lb | Full Feature Weight: kg | lb |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GA 160+ - 5.5 bar | 5.5 | 80 | 5.3 | 77 | 621 | 37.2 | 1316 | 160 | 77 | 3624 | 7990 | 4081 | 8997 |
GA 160+ - 7.5 bar | 7.5 | 109 | 7.3 | 106 | 538 | 32.2 | 1140 | 3624 | 7990 | 4081 | 8997 | ||
GA 160+ - 8.5 bar | 8.5 | 123 | 8.3 | 120 | 498 | 29.8 | 1055 | 3197 | 7049 | 3654 | 8057 | ||
GA 160+ - 10 bar | 10 | 145 | 9.8 | 142 | 448 | 26.9 | 949 | 3197 | 7049 | 3654 | 8057 | ||
GA 200 - 5.5 bar | 5.5 | 80 | 5.3 | 77 | 748 | 44.8 | 1585 | 200 | 78 | 3624 | 7990 | 4217 | 9297 |
GA 200 - 7.5 bar | 7.5 | 109 | 7.3 | 106 | 674 | 40.4 | 1428 | 4927 | 10862 | 5384 | 11870 | ||
GA 200 - 8.5 bar | 8.5 | 123 | 8.3 | 120 | 632 | 37.9 | 1339 | 4927 | 10862 | 5384 | 11870 | ||
GA 200 - 10 bar | 10 | 145 | 9.8 | 142 | 572 | 34.3 | 1212 | 4500 | 9922 | 4957 | 10929 | ||
GA 200 - 14 bar | 14 | 203 | 13.8 | 200 | 440 | 26.4 | 932 | 4500 | 9922 | 4957 | 10929 | ||
GA 250 - 7.5 bar | 7.5 | 109 | 7.3 | 106 | 833 | 49.9 | 1765 | 250 | 78 | 5144 | 11341 | 5737 | 12648 |
GA 250 - 8.5 bar | 8.5 | 123 | 8.3 | 120 | 773 | 46.3 | 1638 | 5144 | 11341 | 5601 | 12348 | ||
GA 250 - 10 bar | 10 | 145 | 9.8 | 142 | 709 | 42.5 | 1503 | 4717 | 10400 | 5174 | 11408 | ||
GA 250 - 14 bar | 14 | 203 | 13.8 | 200 | 575 | 34.5 | 1219 | 4717 | 10400 | 5174 | 11408 | ||
GA 315 - 7.5 bar | 7.5 | 109 | 7.3 | 106 | 1000 | 59.9 | 2119 | 315 | 78 | 5559 | 12256 | 6152 | 13563 |
GA 315 - 8.5 bar | 8.5 | 123 | 8.3 | 120 | 955 | 57.2 | 2024 | 5559 | 12256 | 6152 | 13563 | ||
GA 315 - 10 bar | 10 | 145 | 9.8 | 142 | 891 | 53.4 | 1888 | 5132 | 11315 | 5725 | 12622 | ||
GA 315 - 14 bar | 14 | 203 | 13.8 | 200 | 745 | 44.7 | 1579 | 5132 | 11315 | 5589 | 12323 |
50 Hz Compressor type | Maximum working pressure: bar(e) | psig | Capacity FAD: l/s | m3/ min | cfm | Installed motor: kW | Noise level: dB(A) | Weight: kg | lb |
---|---|---|---|---|---|---|---|---|---|
GA 355 - 7.5 | 7.5 | 109 | 1050 | 63.1 | 2225 | 355 | 73 | 8402 | 18523 |
GA 355 - 8.5 | 8.5 | 123 | 969 | 58.2 | 2053 | 355 | 73 | 8402 | 18523 |
GA 355 - 10 | 10 | 145 | 890 | 53.5 | 1886 | 355 | 73 | 8402 | 18523 |
GA 355 - 13 | 13 | 189 | 731 | 43.9 | 1549 | 355 | 73 | 8402 | 18523 |
GA 400 - 7.5 | 7.5 | 109 | 1175 | 70.6 | 2490 | 400 | 74 | 8602 | 18964 |
GA 400 - 8.5 | 8.5 | 123 | 1109 | 66.6 | 2350 | 400 | 74 | 8602 | 18964 |
GA 400 - 10 | 10 | 145 | 1011 | 60.8 | 2142 | 400 | 74 | 8602 | 18964 |
GA 400 - 13 | 13 | 189 | 844 | 50.7 | 1788 | 400 | 74 | 8602 | 18964 |
GA 450 - 7.5 | 7.5 | 109 | 1298 | 78 | 2750 | 450 | 75 | 8702 | 19185 |
GA 450 - 8.5 | 8.5 | 123 | 1240 | 74.5 | 2628 | 450 | 75 | 8702 | 19185 |
GA 450 - 10 | 10 | 145 | 1144 | 68.8 | 2424 | 450 | 75 | 8702 | 19185 |
GA 450 - 13 | 13 | 189 | 960 | 57.7 | 2034 | 450 | 75 | 8702 | 19185 |
GA 500 - 7.5 | 7.5 | 109 | 1410 | 84.7 | 2988 | 500 | 76 | 8202 | 18082 |
GA 500 - 8.5 | 8.5 | 123 | 1347 | 80.9 | 2854 | 500 | 76 | 8202 | 18082 |
GA 500 - 10 | 10 | 145 | 1257 | 75.5 | 2664 | 500 | 76 | 8202 | 18082 |
GA 500 - 13 | 13 | 189 | 1068 | 64.2 | 2263 | 500 | 76 | 8202 | 18082 |
Dimensions | Standard: D (mm) | W (mm) | H (mm) | D (in) | W (in) | H (in) | Full Feature: D (mm) | W (mm) | H (mm) | D (in) | W (in) | H (in) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
GA 7-15 VSD+ | 630 | 610 | 1420 | 24.8 | 24.02 | 55.91 | 630 | 985 | 1420 | 24.8 | 38.78 | 55.91 |
GA 18-37 VSD+ | 780 | 811 | 1590 | 30.71 | 31.93 | 62.6 | 780 | 1273 | 1590 | 30.71 | 50.12 | 62.6 |
GA 37L VSD+ | 1100 | 1153 | 1968 | 43.31 | 45.39 | 77.48 | 1100 | 1656 | 1968 | 43.31 | 65.2 | 77.48 |
Dimensions | Standard: D (mm) | W (mm) | H (mm) | D (in) | W (in) | H (in) | Full Feature: D (mm) | W (mm) | H (mm) | D (in) | W (in) | H (in) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
GA 37 VSD+ | 780 | 811 | 1590 | 30.71 | 31.93 | 62.6 | 780 | 1273 | 1590 | 30.71 | 50.12 | 62.6 |
GA 37L-75 VSD+ | 1100 | 1153 | 1968 | 43.31 | 45.39 | 77.48 | 1100 | 1656 | 1968 | 43.31 | 65.2 | 77.48 |
GA 75L-110 VSD+ | 1400 | 1300 | 1968 | 55.12 | 51.18 | 77.48 | 2178 | 1300 | 1968 | 85.75 | 51.18 | 77.48 |
Type | Standard: L (mm) | W | H | L (in) | W | H | Full Feature: L (mm) | W | H | L (in) | W | H |
---|---|---|---|---|---|---|---|---|---|---|---|---|
GA 90+/GA 110-160 air-cooled & water-cooled | 2800 | 2000 | 2000 | 111 | 79 | 79 | 3700 | 2000 | 2000 | 146 | 79 | 79 |
GA 110-160 VSD air-cooled | 3200 | 2000 | 2347 | 126 | 79 | 92 | 3800 | 2002 | 2347 | 150 | 79 | 92 |
GA 110-160 VSD water-cooled | 3200 | 1630 | 2347 | 126 | 64 | 92 | 3200 | 1630 | 2347 | 126 | 64 | 92 |
Model | L (mm) | W | H |
---|---|---|---|
GA 160+-315 A/W | 3400 | 2000 | 2300 |
GA 160+-315 A - FF | 4300 | 2000 | 2300 |
GA 160+-315 W - FF | 3400 | 2000 | 2300 |
GA 160+-315 A/W (MV) | 3700 | 2000 | 2300 |
GA 160+-315 A - FF (MV) | 4600 | 2000 | 2300 |
GA 160+-315 W - FF (MV) | 3700 | 2000 | 2300 |
GA 200-315 VSD A | 3700 | 2000 | 2300 |
GA 200-315 VSD A - FF | 4600 | 2000 | 2300 |
GA 200-315 VSD W | 3700 | 2000 | 2300 |
GA 200-315 VSD W - FF | 3700 | 2000 | 2300 |
Compressor type | L (mm) | L (in) | W (mm) | W (in) | H (mm) | H (in) |
---|---|---|---|---|---|---|
GA 355-500 A (LV and MV-IP23) | 5855 | 230.5 | 2120 | 83.5 | 2500 | 98.4 |
GA 355-500 A (MV-IP55) | 6055 | 238.4 | 2120 | 83.5 | 2500 | 98.4 |
GA 355-500 W (LV and MV-IP23) | 4000 | 157.5 | 2120 | 83.5 | 2500 | 98.4 |
GA 355-500 W (MV-IP55) | 4200 | 165.4 | 2120 | 83.5 | 2500 | 98.4 |
PO Box 245
Conestee, SC 29636
Our Close Air Support is ready when you need it including scheduled maintenance.
Our team is ready to find the parts your struggling to source.
24/7 Emergency Support compressor and dryer rentals - 864.605.7792
We can quickly isolate issues or find the source of your energy waste.
All rights reserved, copyright 2022, A10 Compressed Air Services, Inc.
Our Close Air Support is ready when you need it including scheduled maintenance.
Our team is ready to find the parts your struggling to source.
24/7 Emergency Support compressor and dryer rentals - 864.605.7792
We can quickly isolate issues or find the source of your energy waste.